Article List
-
The 0.35 mm Gap: Why Metric and Inch Pneumatic Tube Sizes Are Not InterchangeableA purchase order that lists only "6 mm tube" and a warehouse that ships 1/4 inch tube looks like a rounding error. It is not. Metric and inch pneumatic tube sizes seal on different outside diameters, and the collet inside a push-in fitting is sized for one of them. At Reayon Pneumatic we see this miProduct News October 13, 2026
-
Brass, Nickel-Plated Brass, or Plastic: Which Pneumatic Push-In Fittings Should You Stock?Which pneumatic push-in fittings should a distributor actually put on the shelf? Stock plastic for standard automation at room temperature. Stock nickel-plated brass for hot, wet, oily, or visible installations. Treat bare brass as an economy line for dry indoor air only. That is the short answer.Product News October 06, 2026
-
Pneumatic Thread Identification: BSPP vs BSPT vs NPT vs Metric — How to Order the Right Air FittingMore pneumatic returns start with a thread mismatch than with a defective fitting. BSP and NPT look alike, and in one popular size they even share a pitch. This guide shows how to tell the four families apart, with the angle, pitch and taper data you need before placing an order.Product News September 30, 2026
-
Pneumatic Union Fittings Guide: PE-C Mini Tee Union Air Pipe ConnectorPneumatic union fittings guide from Reayon Pneumatic: how the PE-C mini tee union air pipe connector joins tube lines, sizes, pressure ratings, and union vs threaded choice.Pneumatic union fittings guide from Reayon Pneumatic: how the PE-C mini tee union air pipe connector joins tube lines, sizes, pressure ratings, and union vs threaded choice.Product News September 22, 2026
-
Plastic Pneumatic Push-Fit Fittings: One-Touch Air Connector GuidePlastic pneumatic push-fit fittings from Reayon Pneumatic: one-touch air connector guide with sizes, pressure ratings, materials, install steps, and how to choose the right fitting.Plastic pneumatic push-fit fittings from Reayon Pneumatic: one-touch air connector guide with sizes, pressure ratings, materials, install steps, and how to choose the right fitting.Product News September 15, 2026
-
Nickel-Plated Brass Push-In Fittings: MP Series Metal Pneumatic Connector GuideMP Series nickel-plated brass push-in fittings by Reayon Pneumatic: metal connector guide with specs, pressure ratings, model types (MPUC, MPUL, MPL, MPMF), and when to choose brass over plastic.MP Series nickel-plated brass push-in fittings by Reayon Pneumatic: metal connector guide with specs, pressure ratings, model types (MPUC, MPUL, MPL, MPMF), and when to choose brass over plastic.Product News September 08, 2026
-
SL Series Speed Controllers for Pneumatic Cylinder Speed ControlCompact flow control valves with a precision brass needle for pneumatic cylinder speed control. Meter-out and meter-in options, 0-150 PSI working range, for PU and nylon tubes.Compact flow control valves with a precision brass needle for pneumatic cylinder speed control. Meter-out and meter-in options, 0-150 PSI working range, for PU and nylon tubes.Product News September 01, 2026
-
BSL-A Brass Pneumatic MufflerBSL-A brass pneumatic muffler with sintered bronze core. Cuts exhaust noise 20–30 dB. Thread sizes M5 to 2" BSP. Solid brass body, factory direct.Product News August 18, 2026
-
PTFE Teflon Tube — High-Temperature & Corrosion-Resistant Tubing
PTFE Teflon tube rated -40°C to 260°C. 100 m continuous rolls, zero splices. Sizes 4×2 mm to 14×12 mm. For chemicals, EV batteries, medical, and food-grade fluid lines.
Product News August 11, 2026 -
MV Series Mini Ball ValveThe MV Series Mini Ball Valve features an extruded brass body with chrome plating, available in 1/8"–1/2" sizes. Rated to 25 bar and -10°C to +250°C for water, gas, and air applications.The MV Series Mini Ball Valve features an extruded brass body with chrome plating, available in 1/8"–1/2" sizes. Rated to 25 bar and -10°C to +250°C for water, gas, and air applications.Product News July 21, 2026